3-WAY NORMALLY OPEN Valve
PeterPaul explosion proof solenoid valves are used where fire or explosion hazards exist due to the presence of flammable gas or vapors, flammable liquids, combustible dust or easily ignitable fibers. The low watt feature assures low power consumption, reducing drain on electrical systems. This is a benefit for renewable energy applications and where the solenoid valve must be on continuously.
- Heavy duty and made of stainless steel.
- A real workhorse with proven performance.
- Low power consumption best for renewable energy and limited resource applications.
- Wide range of orifice sizes from 1/32″ to 1/8″.
| MAX. OPER. PRESS. DIFF. | ORIFICE SIZE | CV FACTOR | VALVE NUMBER | |||
|---|---|---|---|---|---|---|
| DC | IN | EXH | IN | EXH | 1/8 NPT PORTS | 1/4 NPT PORTS |
| 400 | 1/32 | 1/32 | .024 | .024 | EL24GG7XCCP-∆ | EL24GG9ZCCP-∆ |
| 150 | 3/64 | 3/64 | .052 | .052 | EL24HH7XCCP-∆ | EL24HH9ZCCP-∆ |
| 40 | 1/16 | 1/16 | .095 | .095 | EL24JJ7XCCP-∆ | EL24JJ9ZCCP-∆ |
| 25 | 3/32 | 3/32 | .156 | .156 | EL24KK7XCCP-∆ | EL24KK9ZCCP-∆ |
Ordering Information:
Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM
When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (EL24GG7XCCP-N 24/DC) repair pack (2KEL24GG-N DC)
When ordering operators add the letter “O” to the front of the valve number, and the body code will change. Contact the factory for the complete part number.
Operating Conditions
- Media
- Air, water, and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require other seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*
- Valve Temperature Range
- -22°F(-30°C) to 140°F (60°C) Exception: FKM is -4°F (-20°C) to 140°F (60°C).
- Maximum Operating Pressure Differentials
- See table above.
- Burst Pressure
- 5,000 PSI
- Leakage
- Bubble tight for standard valves.
- Vacuum
- To 5 Microns*
Electrical Characteristics
- Coil Voltage
- 12, 24/DC
- Nominal Power
- 1.8 Watts
- Coil Construction
- Potted Class F coil with 36” black lead wires and 36” green ground wire.
- Typical Response Time on Air
- 4 - 16 Milliseconds
- Operating Speed
- Up to 600 CPM
- Duty Cycle
- Continuous
Mechanical Characteristics
- Internal Components
- Stainless Steel
- Elastomers
- Buna, Fluorocarbon (FKM), Low Temperature Buna, EPDM or Neoprene.
- Orifice Diameter
- See table above.
- Porting
- 1/8” OR 1/4” NPT
- Housing
- Flame-Proof construction with 1/2" NPT conduit
- Listings
- Valves are cULus listed for Hazardous Locations. — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2 Groups A, B, C, D, E, F, and G.
- Certification
- North American IECEx/ATEX
- Life Expectancy
- Millions of cycles, depending on application, lubrication, etc.
- Valve Weight
- 1.38 lbs
- Repair Packs
- See table above.
- Options
- Alternate Port Locations, Metering, Manual Override, Alternate Elastomers*
Series 20 HAZARDOUS LOCATION VALVES
MODEL EL24 3WNO
1/4-18 NPT EXPLOSION PROOF
MODEL EL24 3WNO
1/8-27 NPT EXPLOSION PROOF
MODEL EL24 3WNO
BODY OPTION "O" EXPLOSION PROOF
MODEL EL24 3WNO
MANUAL OVERRIDE EXPLOSION PROOF
Minimum quantity required. Please contact sales for additional assistance.
sales@peterpaul.com 
MODEL EL24 3WNO
METERING EXPLOSION PROOF
PeterPaul has created this page for you so you can calculate the flow or Cv (flow coefficient) to make the relationship visible between the pressure drop (the difference in pressure between two points of a liquid/gas carrying network) and the flow rate.
The use of this flow coefficient (Cv) calculator offers a standard calculation to compare valve capacities and sizing for a wide range of applications. The type and sizing of a valve or regulator can have a large impact on the performance of the assembly for transferring gas or liquids in the system.
Our sales department is ready to answer questions and to solve your valve needs. Please feel free to call, chat or email us.
Liquid Flow
Calculate Flow in GPM
Calculate Cv
Calculate P1-P2
Gas Flow P2 > 53% of P1 subsonic
Calculate Flow in CFM
Calculate Cv
Approx. Calculate P1
Approx. Calculate P2
Gas Flow P2 < 53% of P1 sonic
Calculate Flow in CFM
Calculate Cv
Calculate P1
