2-WAY NORMALLY CLOSED Valve
Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass (stainless steal). Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.
- Brass body with stainless steel internal construction.
- A smaller, cost effective alternative to any industry standard.
| MAX. OPER. PRESS. DIFF. | ORIFICE SIZE | CV FACTOR | VALVE NUMBER GROMMET HOUSING 1/8 NPT PORTS | CONDUIT HOUSING 1/8 NPT PORTS | |||||
|---|---|---|---|---|---|---|---|---|---|
| AC | DC | BRASS | STAINLESS STEEL | BRASS | STAINLESS STEEL | ||||
| 375 | (650)* | 375 | (650)* | 1/32 | .024 | 32G5DGM | — | 32G5DCM | — |
| 280 | (650)* | 280 | (650)* | 3/64 | .055 | 32H5DGM | 32H8DGM | 32H5DCM | 32H8DCM |
| 275 | 250 | 1/16 | .105 | 32J5DGM | 32J8DGM | 32J5DCM | 32J8DCM | ||
| 180 | 100 | 3/32 | .195 | 32K5DGM | 32K8DGM | 32K5DCM | 32K8DCM | ||
| 130 | 80 | 7/64 | .220 | 32L5DGM | 32L8DGM | 32L5DCM | 32L8DCM | ||
| 90 | 50 | 1/8 | .275 | 32N5DGM | 32N8DGM | 32N5DCM | 32N8DCM | ||
| 60 | 25 | 5/32 | .360 | 32O5DGM | 32O8DGM | 32O5DCM | 32O8DCM | ||
| 40 | 15 | 3/16 | .400 | 32P5DGM | 32P8DGM | 32P5DCM | 32P8DCM | ||
* FKM seals not recommended for pressure above 500 psi.
+ Ratings in brackets are optional extended ratings; consult factory
Ordering Information:
When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (32N5DGM 120/60) repair pack (K32NDD AC)
When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O32N5DGM 120/60)
Operating Conditions
- Media
- Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*
- Valve Temperature Range
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
- Maximum Operating Pressure Differentials
- See table above.
- Burst Pressure
- 5000 PSI
- Leakage
- Bubble tight for standard valves.
- Vacuum
- To 5 Microns*
Electrical Characteristics
- Coil Voltage
- 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
- Nominal Power
- AC — 7.0 Watts DC — 8.0 Watts
- Coil Construction
- Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)
- Typical Response Time on Air
- 4 - 16 Milliseconds
- Operating Speed
- Up to 600 CPM
- Duty Cycle
- Continuous
Mechanical Characteristics
- Internal Components
- Stainless Steel. Copper – AC Only.
- Elastomers
- Nitrile (Buna) (Std.). Many other elastomers available.*
- Orifice Diameter
- See table above.
- Porting
- Standard 1/8" NPT (other ports available).*
- Housing
- Grommet and 1/2" NPT conduit - many options available.*
- Listings
- Most valves are UL and CSA listed.*
- Life Expectancy
- Millions of cycles, depending on application, lubrication, etc.
- Valve Weight
- Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb
- Repair Packs
- See table above.
- Options
- Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil
Series 30 2WNC General Purpose Valves Conduit
MODEL 32 1/8-NPT PORTS
2WNC
CONDUIT CONNECTION
Series 30 2WNC General Purpose Valves DIN
MODEL 32 1/8-27 NPT
2WNC
DIN STYLE COIL
Series 30 2WNC General Purpose Valves Grommet
MODEL 32
2WNC
GROMMET WITH LEADS
Series 30 2WNC General Purpose Valves Grommet/Bracket Connection
Minimum quantity required. Please contact sales for additional assistance.
sales@peterpaul.com 
MODEL 32 1/8-27 NPT
2WNC
GROMMET/BRACKET HOUSING WITH LEADS
Series 30 2WNC General Purpose Valves Conduit/Bracket Connection
Minimum quantity required. Please contact sales for additional assistance.
sales@peterpaul.com 
MODEL 32 1/8-27 NPT
2WNC
CONDUIT/BRACKET CONNECTION
PeterPaul has created this page for you so you can calculate the flow or Cv (flow coefficient) to make the relationship visible between the pressure drop (the difference in pressure between two points of a liquid/gas carrying network) and the flow rate.
The use of this flow coefficient (Cv) calculator offers a standard calculation to compare valve capacities and sizing for a wide range of applications. The type and sizing of a valve or regulator can have a large impact on the performance of the assembly for transferring gas or liquids in the system.
Our sales department is ready to answer questions and to solve your valve needs. Please feel free to call, chat or email us.