3-WAY NORMALLY CLOSED (e to a) Valve
PeterPaul’s model H23 has a dual operator valve that allows the same media control as a three-way normally closed valve but at much higher pressure ratings than previously available. To function as a 3-way normally closed valve, operators must be alternately energized and de-energized. Pressure applied to the “IN” port must always be equal to or greater than the pressure in the “CYL” port. Air and other non-corrosive gases, water, and oil.
- Made for higher pressure ratings.
- Precision stainless steel, free-floating plunger.
- Kel-F pin sealing element.
- Orifice guides the sealing pin for near-perfect alignment.
| GAS PRESSURE RATINGS | ORIFICE SIZE | CV FACTOR | VALVE NUMBER | ||||
|---|---|---|---|---|---|---|---|
| AC | DC | 1/4 NPT PORTS | |||||
| 3000* | 3000* | 1/32 | .022 | H23GG19DCM | |||
| 2500* | 1500* | 3/64 | .041 | H23HH19DCMG | |||
| 1750* | 500 | 1/16 | .065 | H23JJ19DCMG | |||
| 650* | 100 | 3/32 | .100 | H23KK19DCMG | |||
| LIQUID PRESSURE RATINGS | ORIFICE SIZE | CV FACTOR | VALVE NUMBER | ||||
| AC | DC | 1/4 NPT PORTS | |||||
| 3000* | 3000* | 1/32 | .022 | H23GG19DCM | |||
| 1500* | 1500* | 3/64 | .041 | H23HH19DCML | |||
| 1000* | 500 | 1/16 | .065 | H23JJ19DCML | |||
| 300 | 100 | 3/32 | .100 | H23KK19DCML | |||
* FKM seals not recommended for pressure above 500 psi.
Ordering Information:
When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H23JJ19DCV 120/60) repair pack (KH23JJ AC)
Operating Conditions
- Media
- Air and other non-corrosive gasses, water and oil.
- Valve Temperature Range
- Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
- Maximum Operating Pressure Differentials
- See table above.
- Burst Pressure
- 10,000 PSI
- Leakage
- Bubbletight (with polymer sealing pins)
- Filtration
- Down to 60 microns or less is recommended.
Electrical Characteristics
- Coil Voltage
- 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
- Nominal Power
- AC — 7.3 Watts DC — 9.5 Watts (Per Operator)
- Coil Construction
- Molded (Std.) and Potted Class F or Class H (Opt.)
- Typical Response Time on Air
- 4 - 16 Milliseconds
- Operating Speed
- Up to 600 CPM with gas media
- Duty Cycle
- Continuous
Mechanical Characteristics
- Internal Components
- Stainless Steel. Copper – AC Only.
- Elastomers
- Nitrile (Buna) (Std.). Many other elastomers available.*
- Sealing Pin
- Kel-F (Std.), Delrin®, PEEK
- Orifice Diameter
- See table above.
- Porting
- 1/4" NPT
- Mounting
- Must be mounted within 30° of vertical.
- Housing
- Grommet or 1/2" NPT conduit
- Life Expectancy
- Millions of cycles, depending on application, lubrication, etc.
- Valve Weight
- 3.63 lbs
- Repair Packs
- See table above.
- Options
- Alternate Sealing Pin Materials and Alternate Elastomers*
Series 20 High Pressure Valves Conduit
3WNC
HIGH PRESSURE
CONDUIT CONNECTION
PeterPaul has created this page for you so you can calculate the flow or Cv (flow coefficient) to make the relationship visible between the pressure drop (the difference in pressure between two points of a liquid/gas carrying network) and the flow rate.
The use of this flow coefficient (Cv) calculator offers a standard calculation to compare valve capacities and sizing for a wide range of applications. The type and sizing of a valve or regulator can have a large impact on the performance of the assembly for transferring gas or liquids in the system.
Our sales department is ready to answer questions and to solve your valve needs. Please feel free to call, chat or email us.